150 “FU” Series Axles Spare Parts

Revision Date: June 2017
Part No. 80286 REV A

150 series axle is TUV tested to 11000Kg.

Available in single and twin wheel stud; 10 spline camshaft; Brake Size: 420mm x 220mm; 335mm PCD 10 stud M22 hub and drum; 280.8mm hub pilot.

420 x 220mm – 150 series FU Bill of Materials
View / Download PDF

Quick Fit Brake Assembly

420 x 220mm – 150 Series Quick Fit Brake Assembly
Item Part No. Description
161171Anchor Pin
261200BBush Anchor Pin
361141Brake Shoe Retaining Spring
61156A Brake Shoe Assembly
(4)61150Spring Anchor Bar
(5)61220Retainer Cam Roller
61235One Piece Cam Roller
(6)61156Brake Shoe
761359M10 x 20 Screw
861080Camshaft Spherical Bearing
961140Spring Return
1061110Greaser 1/8 NPT 45°
1161120Circlip
1261058Support Washer Camshaft
1361056Camshaft Grease Seal
1461057Camshaft Beveled Washer
1561055Camshaft Sintered Bush

Hub/Drum Assembly

420 x 220mm – 150 Series Hub/Drum Assembly
Item Part No. Description
1.61358Screw M8 x 16 Fl. Head
2.61322FHub Cap Pressing "G"
3.61310Locknut
4.61311Tab Washer
5.61300Lock Washer
6.61290Adjusting Nut
7.61270FOuter Bearing
8.61330FGasket
9.61381ZWheel Nut M22 ISO
10.61250Hub Spigot 10 Stud
11.61260FInner Bearing
12.61282FUnitised Grease Seal
13.61363Wheel Bolt M22 ISO (Twin)
61361Wheel Bolt M22 ISO (Single)
14.61241Brake Drum 10 Stud
15.61391Dust Cover
16.61358Screw M8 x 16 Fl.Head

ABS/Anti-Lock Assembly

420 x 220mm – 150 Series ABS/Anti-Lock Assembly
Item Part No. Description
161789Pole Wheel
261781FSensor Block
361557Dust Cover Grommet
461791Straight Sensor Lead & Bush

Pole wheel at 178mm PCD
Face of sensor block 23.5mm from large bearing shoulder
Bolt on ABS block (as shown above) is positioned 90 degrees to camshaft. Weld on style is 180 degrees to camshaft and is in line with hole in anchor bracket.

420 x 220mm – 150 Series ABS/Anti-Lock Assembly

Camshafts

Camshaft lengths are measured from under head to the center of last circlip groove.

The illustrated camshaft is a right-hand camshaft. When looking at the head of the camshaft a right-hand cam is Z shaped and a left hand is S shaped

420 x 220mm – 150 Series Camshafts
Item Part No. Description (DIM A)
161065Left Hand Large Head (519mm)
261075Right Hand Large Head (519mm)
361067Left Hand Large Head (618mm)
461077Right Hand Large Head (618mm)

Position of seals in the anchor bracket

Position of seals in the anchor bracket

The direction of the grease seals in the anchor bracket is important as well as the position of the beveled washer between the anchor bracket and camshaft head.

Ordering Of Sub-Assemblies

It is possible to order sub-assemblies of parts from Granning rather than ordering individual parts.

Hub and Drum Assembly

Hub and Drum Assembly

71001A – Single Wheel Stud Hub and Drum Assembly
71001AW – 71001A with 1x 100-tooth pole wheel 61789

Part No. Description QTY per Kit
61243FDrum1
61253FHub1
61270FOuter Bearing1
61260FInner Bearing1
61388FSingle wheel stud10
61381ZISO wheel nut10

71004A – Twin Wheel Stud Hub and Drum Assembly
71004AW – 71004A with 1x 100-tooth pole wheel 61789

Part No. Description QTY per Kit
61243FDrum1
61253FHub1
61270FOuter bearing1
61260FInner bearing1
61386FTwin wheel stud10
61381ZISO wheel nut10

HCL-A – Hub Cap and spindle nut assembly

HCL-A – Hub Cap and spindle nut assembly
Part No. Description QTY per Axle
61330AGasket2
61322AHub cap - Silver2
61351M8 bolts12
61310Lock nut2
61300Lock washer2
61311Tab washer2
61290Adjusting nut2
61353M8 spring washer12