860 “A” Series Axle Spare Parts

Revision Date: March 2026
Part No. 80391 REV B

860 “A” series axle is TUV tested to 10000Kg.

Available in single and twin wheel stud; 10 spline camshaft; Brake Size: 406mm x 120mm; 335mm PCD 10 stud M22 hub and drum; 281mm hub pilot.

Quick Fit Brake Assembly
Hub / Drum Assembly
ABS/Anti-Lock Assembly
Camshafts
Loose Parts
Position of seals in the Anchor Bracket
Ordering of Sub-Assemblies

View / Download PDF

Quick Fit Brake Assembly

Item	Part No.	Description	QTY per Axle
1	61171	Anchor Pin	4
2	61200B	Bush Anchor Pin	4
3	61141A	Brake Shoe Retaining Spring	4
4	61150	Spring Anchor Bar	4
5	61220	Retainer Cam Roller	4
	61235	One Piece Cam Roller	4
6	61159A	Brake Shoe (AS120)	4
7	61359	M10x 20 Screw	8
	96363F	M10 spring washer	8
8	61080	Camshaft Spherical Bearing	2
9	61143	Spring Return	2
10	61110	Greaser 1/8 NPT 45°	2
11	61120	Circlip	2
12	68159	Support Washer Camshaft	2
13	61056	Camshaft Grease Seal	4
14	61060	Washer Under Camshaft Head	2
15	61055	Camshaft Sintered Bush	2

Hub/Drum Assembly

Item	Part No.	Description	QTY per Axle
1	61358F	Screw M8 x 16 Fl. Head	12
	61352		12
2	61322A	Hub Cap Pressing "G"	2
3	61330A	Gasket	2
4	61310	Locknut	2
5	61311	Tab Washer	2
6	61300	Lock Washer	2
7	61290	Adjusting Nut	2
8	61270F	Outer Bearing	2
9	61381Z	ISO Wheel Nut M22	20
	61383	DIN Wheel Nut M22	(20)
	61411	DIN Wheel Nut M22	(20)
	61372	DIN Nut Outer Cone Washer	(20)
	61371	DIN Nut Inner Cone Washer	(20)
10	61550	Brake Drum 10 Stud	2
11	61253	Hub Spigot 10 Stud	2
12	61260F	Inner Bearing	2
13	61282	Unitised Grease Seal	2
14	61404A	Dust Cover Spacer	12
	61396A	Dust Cover Round & Square Beam (2 piece)	2
15	61386F	Wheel Bolt M22 ISO (Twin)	20
	61375	Wheel Bolt M22 ISO (Single)	20
16	70914	Screw M8 x 40	12
	61352	M8 washer	12

ABS/Anti-Lock Assembly

Item	Part No.	Description
1	61789	Pole Wheel
2	61781	ABS Sensor Block
3	61792	ABS Sensor Bush
4	61791	Straight ABS Sensor Lead

Pole wheel at 172mm PCD
Face of sensor block 23.5mm from large bearing shoulder
Weld on ABS block is 180 degrees to camshaft and is in line with hole in anchor bracket.

Camshafts

Camshaft lengths are measured from under head to the center of last circlip groove.

The illustrated camshaft is a right-hand camshaft. When looking at the head of the camshaft a right-hand cam is Z shaped and a left hand is S shaped

406 x 120 – 860 Series Camshaft Parts List | Granning Axles & Suspensions

Item	Part No.	Description (DIM A)
1	61127	Left Hand Large Head (189mm)
2	61147	Right Hand Large Head (189mm)
3	61061	Left Hand Large Head (212mm)
4	61071	Right Hand Large Head (212mm)
5	61138	Left Hand Large Head (250mm)
6	61148	Right Hand Large Head (250mm)
7	61065	Left Hand Large Head (519mm)
8	61075	Right Hand Large Head (519mm)
9	61067	Left Hand Large Head (618mm)
10	61077	Right Hand Large Head (618mm)

Loose Parts

Position of seals in the anchor bracket

The direction of the grease seals in the anchor bracket is important as well as the position of the beveled washer between the anchor bracket and camshaft head.